No Hat No Boots No Job Site Banner

Yes, on the largest sizes. Banners over 3 m on any side and boards larger than A0 travel by a specialist courier, which adds £15 once per order however many oversize items you buy. For No Hat No Boots No Job Site Banner that applies to 3.3m x 1.8m (Heras panel). Smaller sizes go at the normal rate: UK mainland delivery is £7.95 per order and free when your goods total is £99 or more after any discount code (artwork and design fees do not count towards it).

Yes. Enter any width from 500 mm to 3500 mm and height from 300 mm to 2000 mm, and the price updates as you type. Anything bigger, or a special shape, can be quoted. The No Hat No Boots No Job Site Banner comes in 3 listed sizes, from 3 ft 11 in × 2 ft 7 in (1200 × 800 mm) to 10 ft 10 in × 5 ft 11 in (3300 × 1800 mm).

A mesh banner is printed on one side. Because of the open weave, a reversed image shows faintly from the back, but it is not readable as a second face. If people need to read it from both sides of a fence, use two banners back to back, or a solid PVC banner on each side. The No Hat No Boots No Job Site Banner is printed on 260gsm mesh banner and 440gsm PVC banner, hemmed, eyelets.

A PDF at the finished size is best, with fonts embedded or converted to outlines. We also take AI, EPS and SVG, and high resolution JPG, PNG or TIFF files. Word, PowerPoint and Canva files are fine as a starting point, but export a full-quality PDF if you can. You can upload up to 3 files of 25 MB each on the product page, or upload later: we email you after you order. For the No Hat No Boots No Job Site Banner, set your file up at the size you order, for example 3 ft 11 in × 2 ft 7 in (1200 × 800 mm).

For large items read from a distance, 100 to 150 dpi at the finished size is enough. At 100 dpi a 10 ft 10 in × 5 ft 11 in (3300 × 1800 mm) design needs about 12,992 × 7,087 pixels. Logos and text are best as vector artwork, which stays sharp at any size. Photos taken from websites or social media are usually far too small; our file check flags images that may print soft.

Our file check catches the usual problems: the wrong size, no bleed, low resolution images and text too close to the edge. We tell you what needs fixing before anything is printed, and you can send a new file. If you would rather we sort it, the typesetting option (£15, 1 proof and 2 rounds of changes) sets your text and logo on a clean layout. The No Hat No Boots No Job Site Banner comes in 3 listed sizes, from 3 ft 11 in × 2 ft 7 in (1200 × 800 mm) to 10 ft 10 in × 5 ft 11 in (3300 × 1800 mm).

Yes. You can upload your file on the product page, or place the order and upload later: we email you after you order. Your designer can send the file to us by email or WhatsApp with your order number, so it does not have to come through you. The turnaround clock starts once your order and artwork are confirmed, so send the file early if you have a deadline. For the No Hat No Boots No Job Site Banner, set your file up at the size you order, for example 3 ft 11 in × 2 ft 7 in (1200 × 800 mm).

Yes. A person from our team checks every uploaded file for size, bleed and resolution, and tells you if something needs fixing before anything is made. If you design online instead, you approve exactly what you see on screen, and that is what we print. We print what you supply, so check spelling, phone numbers and dates yourself too. Production starts once your order and artwork are confirmed. The No Hat No Boots No Job Site Banner can also be designed in our online designer, where you approve exactly what you see.

On a 6 ft 7 in × 3 ft 3 in (2000 × 1000 mm) site banner, keep text 50 mm in from every edge, which leaves about 900 mm of height to work with. A single headline in capitals 270 mm tall reads from roughly 32 m away, using the sign-trade rule of thumb of 25 mm of capital height for every 3 m of viewing distance. Fewer words, bold fonts and strong contrast read further than more words squeezed in.

Yes. When you order printing with a design made in our online designer, the high resolution PDF is attached to your order, and once the order is paid you can download it from My Account and your confirmation email. If you only want the file and no printing, approve the design and buy the print-ready PDF for £9.99. It is digital content, so the right to cancel ends once the download starts. For the No Hat No Boots No Job Site Banner, set your file up at the size you order, for example 3 ft 11 in × 2 ft 7 in (1200 × 800 mm).

The price shown is for one site banner in the size and material you pick. Set the quantity box next to Add to basket and the basket multiplies it. If you need several different sizes or materials, add each one to the basket separately. One artwork fee covers the whole quantity of a line, and "Same artwork as another item in my basket" adds no second fee. For large runs, ask for a quote. The No Hat No Boots No Job Site Banner starts at £46.10 before delivery.

Only delivery is added. The goods price you see in the calculator is final, with no VAT added. UK mainland delivery is £7.95 per order and free when your goods total is £99 or more after any discount code (artwork and design fees do not count towards it). Any artwork or design fee you choose shows as its own line in the basket, so you can see exactly what you are paying for. The No Hat No Boots No Job Site Banner is made to order by our UK production partner.

Yes. Express makes this site banner ready to dispatch in 3 working days on the opening option, priced at £61.44 against £46.10 on Saver (7 days). To plan back from a date, add 1 to 3 working days for the courier after dispatch and allow for artwork: production starts once your order and artwork are confirmed. If the date is very tight, call 0161 315 1151 before you order.

Yes, with a difference in price. Mainland Scottish Highlands postcodes, for example around Inverness, Fort William, Oban and Thurso, pay the mainland rate plus £10 once per order, even when the order qualifies for free delivery. Northern Ireland, the Scottish islands, the Isle of Man, the Channel Islands, the Isles of Scilly and the Isle of Wight are quoted before you order: use Get a quote or call 0161 315 1151. We do not deliver outside the UK. The largest sizes of the No Hat No Boots No Job Site Banner travel as oversize items (+£15 once per order).

Let it dry completely, wipe off any dirt, then roll it loosely with the printed side facing out, around a tube if you have one. Avoid folding it hard, which leaves creases and can crack the print along the fold. Keep it somewhere dry and away from heat. Remove old cable ties before you roll it so they do not dent the print. The No Hat No Boots No Job Site Banner is printed on 260gsm mesh banner and 440gsm PVC banner, hemmed, eyelets.

This No Hat No Boots No Job banner tells everyone that head protection is required. It is part of our Builders & Construction range, which gathers what builders and contractors order for building sites. Other items in the same range include Scaffold Banners, Correx Boards, Printed Hoarding Boards and Caution Fragile Roof Sign. You can mix items in one basket, and delivery is free once the goods total reaches £99. The No Hat No Boots No Job Site Banner is part of our Builders & Construction range.

It can. A solid banner adds wind load, and a line of temporary fencing is designed to stand up to a certain amount of wind. Ask whoever installed the fencing before you fix large solid banners to it; they may add extra feet, stays or ballast. Mesh lets much of the wind through and is the usual choice for fence runs. HSE guidance on construction sites covers keeping temporary structures stable. The No Hat No Boots No Job Site Banner carries the ISO 7010 M014 symbol.

A banner can be tied straight onto Heras fencing, hoardings and gates where a rigid sign is awkward to fix, and it rolls up to move to the next site. The Construction (Design and Management) Regulations 2015 expect sites to give clear safety information; your own risk assessment decides which signs go where. For a permanent position on a wall or post, a rigid sign board lasts longer. The No Hat No Boots No Job Site Banner carries the ISO 7010 M014 symbol.

It looks for sample text you have not replaced, text below the smallest size that prints clearly, anything too close to the edge or outside the safe area, logos or photos too low in resolution for the size, and items overlapping text. Blocking problems must be fixed before you can approve; warnings you can accept if you are happy. The checks do not read your spelling, so check names, numbers and dates yourself. For the No Hat No Boots No Job Site Banner, set your file up at the size you order, for example 3 ft 11 in × 2 ft 7 in (1200 × 800 mm).

Contact us straight away on 0161 315 1151 or WhatsApp with your order number. If production has not started we can take a corrected file, or cancel the order and refund you in full. Once production starts the order cannot be changed. Printing that matches the design you approved or the file you supplied is not a fault, so check spelling, phone numbers and dates carefully before you order. The No Hat No Boots No Job Site Banner is made to order by our UK production partner.

Yes. Call us on 0161 315 1151 or message us on WhatsApp and tell us where the site banner will go, how long it needs to last and your deadline. You can also ask a question on this page; our team answers and the question may be published to help other buyers. For a price on something the calculator does not cover, use Get a quote. The No Hat No Boots No Job Site Banner starts at £46.10 before delivery.

Yes. Add each design to the basket as its own line with its own file or online design, then check out once. Delivery is charged once per order, and becomes free when the goods total reaches £99. If several lines use the same artwork, choose "Same artwork as another item in my basket" so you only pay one design fee. The No Hat No Boots No Job Site Banner comes in 3 listed sizes, from 3 ft 11 in × 2 ft 7 in (1200 × 800 mm) to 10 ft 10 in × 5 ft 11 in (3300 × 1800 mm).

No. We are not VAT registered, so we do not charge VAT and cannot issue a VAT invoice. You get an order confirmation email with the items, options and total paid, which works as your receipt. Because no VAT is added, the price you see in the calculator is the price you pay for the goods, with delivery shown at checkout. The No Hat No Boots No Job Site Banner is made to order by our UK production partner.

No. You can check out as a guest and pay by debit or credit card, processed securely by Stripe. Creating an account at checkout lets you see past orders in My Account and download the print files of designs you made online. Either way you get an order confirmation email and a tracking email when your order is dispatched. The No Hat No Boots No Job Site Banner comes in 3 listed sizes, from 3 ft 11 in × 2 ft 7 in (1200 × 800 mm) to 10 ft 10 in × 5 ft 11 in (3300 × 1800 mm).

Yes. Order the same product and options again and upload the same file. If you designed it online, the print PDF from your first paid order is in My Account and your confirmation email, ready to upload again. If anything like a phone number or price has changed, update the artwork before you reorder. The No Hat No Boots No Job Site Banner is made to order by our UK production partner.

Yes. Use the Get a quote page and tell us the size, quantity, material, deadline and delivery postcode, and attach any artwork you have. We reply by email or WhatsApp with a price. A quote is also the way to go for delivery to Northern Ireland and the islands. The No Hat No Boots No Job Site Banner comes in 3 listed sizes, from 3 ft 11 in × 2 ft 7 in (1200 × 800 mm) to 10 ft 10 in × 5 ft 11 in (3300 × 1800 mm).

By debit or credit card at checkout. Payments are processed securely by Stripe, and we never see or store your full card number. Your order goes into production once payment is taken and your order and artwork are confirmed. For a large or unusual order you can ask for a quote first. The No Hat No Boots No Job Site Banner comes in 3 listed sizes, from 3 ft 11 in × 2 ft 7 in (1200 × 800 mm) to 10 ft 10 in × 5 ft 11 in (3300 × 1800 mm).

No. This site banner is printed to your order, and the 14-day right to cancel does not apply to goods made to your specification (Consumer Contracts Regulations 2013, regulation 28(1)(b)). You can cancel for a full refund before production starts. If an item is faulty, damaged or not what you ordered, your Consumer Rights Act 2015 rights apply and we reprint or refund. The No Hat No Boots No Job Site Banner comes in 3 listed sizes, from 3 ft 11 in × 2 ft 7 in (1200 × 800 mm) to 10 ft 10 in × 5 ft 11 in (3300 × 1800 mm).

The No Hat No Boots No Job Site Banner is made to order by our UK production partner. Either way, InstantBanners takes the order, checks your file and deals with you from start to finish, and the item is delivered to you by courier. You can reach our Manchester team on 0161 315 1151 or WhatsApp if you have a question before or after you order.

Check it when it arrives. If anything is damaged or missing, tell us within 48 hours with photos of the item and the packaging, through the contact form or on WhatsApp, with your order number. Do not send anything back until we reply; we then arrange a reprint or a refund. This does not affect your legal rights, which the returns page explains. On the opening option, the No Hat No Boots No Job Site Banner is ready to dispatch in 7 working days on Saver or 3 on Express.

PVC banner and mesh material is not accepted in most household recycling collections, so reuse is the best route: store it well and use it again, or give it a second life as a cover or tarp. Some specialist recyclers take PVC banners; check with your local council or waste contractor. The No Hat No Boots No Job Site Banner is printed on 260gsm mesh banner and 440gsm PVC banner, hemmed, eyelets.

Use warm water with a little mild washing-up liquid and a soft cloth or sponge, then rinse with clean water and let it dry flat or hanging. Do not use solvents, abrasive pads or a pressure washer, which can lift the ink or damage the surface. Dry it fully before you roll it up, or it can mark and smell. The No Hat No Boots No Job Site Banner is printed on 260gsm mesh banner and 440gsm PVC banner, hemmed, eyelets.