Danger High Voltage Keep Out Sign

Only where there is light on it. We print on 3mm Foamex, 3mm Dibond aluminium composite and self-adhesive vinyl, which are not reflective or glow in the dark. For car parks, yards and routes used after dark, position signs under existing lighting, or light them. Where your risk assessment calls for reflective or photoluminescent signs, you will need a specialist supplier.

Foamex and Dibond boards can be screwed to a wall through holes drilled near the corners; use washers and do not overtighten, especially on Foamex. On smooth indoor walls and doors, double-sided foam tape or adhesive pads avoid drilling. On fences, drill the board and cable tie it through the holes. The vinyl version simply peels and sticks to a clean, dry, smooth surface. The Danger High Voltage Keep Out Sign is printed on 3mm Foamex, 3mm Dibond aluminium composite and self-adhesive vinyl.

Our file check catches the usual problems: the wrong size, no bleed, low resolution images and text too close to the edge. We tell you what needs fixing before anything is printed, and you can send a new file. If you would rather we sort it, the typesetting option (£15, 1 proof and 2 rounds of changes) sets your text and logo on a clean layout. The Danger High Voltage Keep Out Sign is printed on 3mm Foamex, 3mm Dibond aluminium composite and self-adhesive vinyl.

For items read close up, aim for 300 dpi at the finished size. At 300 dpi an A1 (594 × 841 mm) design needs about 7,016 × 9,933 pixels. Logos and text are best as vector artwork, which stays sharp at any size. Photos taken from websites or social media are usually far too small; our file check flags images that may print soft.

Yes. You can upload your file on the product page, or place the order and upload later: we email you after you order. Your designer can send the file to us by email or WhatsApp with your order number, so it does not have to come through you. The turnaround clock starts once your order and artwork are confirmed, so send the file early if you have a deadline. For the Danger High Voltage Keep Out Sign, set your file up at the size you order, for example A4 (210 × 297 mm).

A PDF at the finished size is best, with fonts embedded or converted to outlines. We also take AI, EPS and SVG, and high resolution JPG, PNG or TIFF files. Word, PowerPoint and Canva files are fine as a starting point, but export a full-quality PDF if you can. You can upload up to 3 files of 25 MB each on the product page, or upload later: we email you after you order. For the Danger High Voltage Keep Out Sign, set your file up at the size you order, for example A4 (210 × 297 mm).

Yes. A person from our team checks every uploaded file for size, bleed and resolution, and tells you if something needs fixing before anything is made. We print what you supply, so check spelling, phone numbers and dates yourself too. Production starts once your order and artwork are confirmed. The Danger High Voltage Keep Out Sign comes in 4 listed sizes, from A4 (210 × 297 mm) to A1 (594 × 841 mm).

Only delivery is added. The goods price you see in the calculator is final, with no VAT added. UK mainland delivery is £7.95 per order and free when your goods total is £99 or more after any discount code (artwork and design fees do not count towards it). Any artwork or design fee you choose shows as its own line in the basket, so you can see exactly what you are paying for. The Danger High Voltage Keep Out Sign is printed in our Manchester workshop or by our UK production partner, depending on the size and material.

The price shown is for one sign in the size and material you pick. Set the quantity box next to Add to basket and the basket multiplies it. If you need several different sizes or materials, add each one to the basket separately. One artwork fee covers the whole quantity of a line, and "Same artwork as another item in my basket" adds no second fee. For large runs, ask for a quote. The Danger High Voltage Keep Out Sign is printed in our Manchester workshop or by our UK production partner, depending on the size and material.

Yes, with a difference in price. Mainland Scottish Highlands postcodes, for example around Inverness, Fort William, Oban and Thurso, pay the mainland rate plus £10 once per order, even when the order qualifies for free delivery. Northern Ireland, the Scottish islands, the Isle of Man, the Channel Islands, the Isles of Scilly and the Isle of Wight are quoted before you order: use Get a quote or call 0161 315 1151. We do not deliver outside the UK. The Danger High Voltage Keep Out Sign starts at £5.28 before delivery.

Yes. Express makes this sign ready to dispatch in 2 working days on the opening option, priced at £7.03 against £5.28 on Saver (6 days). To plan back from a date, add 1 to 3 working days for the courier after dispatch and allow for artwork: production starts once your order and artwork are confirmed. If the date is very tight, call 0161 315 1151 before you order.

At A4 (210 × 297 mm): 3mm Foamex £29.26, 3mm Dibond aluminium composite £42.94 and self-adhesive vinyl £5.28. The gap stays similar on bigger sizes, which the Prices by size table on this page shows in full. Choose on where the sign goes rather than price alone: the cheapest material is not always the one that lasts in that spot.

The Danger High Voltage Keep Out Sign has 4 listed sizes from A4 (210 × 297 mm); Danger High Voltage No Admittance Sign has 3 from 200 × 50 mm. Prices start at £5.28 and £4.01 respectively. Pick the one whose size and material fit where it will go; both pages show live prices for every option.

Signs that are often needed alongside it include Danger High Voltage No Admittance Sign, Danger of Death Keep Out Sign, Danger 11,000 Volts Sign and Danger Electric Shock Risk Sign. Each has its own page with sizes, materials and live prices, and ordering them in the same material keeps a set looking consistent. Add them to one basket: delivery is charged once, and it is free once the goods total reaches £99. The Danger High Voltage Keep Out Sign is printed on 3mm Foamex, 3mm Dibond aluminium composite and self-adhesive vinyl.

The largest listed size is A1 (594 × 841 mm), from £15.91. For a bigger sign, use Get a quote with the size, material and quantity, and we will price it. Boards larger than A0 travel as oversize items, which adds £15 once per order.

This design is portrait, in A4 (210 × 297 mm), A3 (297 × 420 mm), A2 (420 × 594 mm) and A1 (594 × 841 mm). Portrait suits doors, posts and narrow wall spaces. If you need the other way round, choose a design option and we will lay it out for you.

Foamex is a foamed plastic, so in strong sun and heat a large, thin board can bow, especially if it is only fixed at the corners. Dibond has aluminium skins and stays flat, which is why it is the choice for long-term outdoor signs. Fixing Foamex flat against a wall, or choosing a thicker board, keeps it straighter. The Danger High Voltage Keep Out Sign is printed on 3mm Foamex, 3mm Dibond aluminium composite and self-adhesive vinyl.

Yes. Self-adhesive vinyl is the neatest choice for doors and glass panels. A 3mm Foamex board with double-sided foam tape also works well on a flat door. Place it at eye level on the push side or beside the door, where it is not hidden when the door is open. If the door is a fire door, check with whoever manages it before screwing anything into it.

Foamex and Correx cut with a sharp craft knife and a straight edge: score a few times, then snap or cut through. Dibond has aluminium skins, so it needs a fine-toothed saw and a steady hand. Drill fixing holes with an ordinary drill bit, going slowly, and keep holes at least 10 mm from the edge. Cutting into the print loses the bleed, so allow for it in the design. The Danger High Voltage Keep Out Sign is printed on 3mm Foamex, 3mm Dibond aluminium composite and self-adhesive vinyl.

Supply CMYK where you can. RGB files are converted to CMYK for print, which can make very bright greens, blues and oranges look slightly duller. If you need a brand colour matched, give us the Pantone reference and we match it as closely as the material allows. Small differences between a screen and the printed item are normal, because screens give off light and print reflects it. The Danger High Voltage Keep Out Sign is printed on 3mm Foamex, 3mm Dibond aluminium composite and self-adhesive vinyl.

Yes. Add each design to the basket as its own line with its own file or online design, then check out once. Delivery is charged once per order, and becomes free when the goods total reaches £99. If several lines use the same artwork, choose "Same artwork as another item in my basket" so you only pay one design fee. The Danger High Voltage Keep Out Sign is printed in our Manchester workshop or by our UK production partner, depending on the size and material.

Yes. Call us on 0161 315 1151 or message us on WhatsApp and tell us where the sign will go, how long it needs to last and your deadline. You can also ask a question on this page; our team answers and the question may be published to help other buyers. For a price on something the calculator does not cover, use Get a quote. The Danger High Voltage Keep Out Sign is printed in our Manchester workshop or by our UK production partner, depending on the size and material.

No. We are not VAT registered, so we do not charge VAT and cannot issue a VAT invoice. You get an order confirmation email with the items, options and total paid, which works as your receipt. Because no VAT is added, the price you see in the calculator is the price you pay for the goods, with delivery shown at checkout. The Danger High Voltage Keep Out Sign is printed in our Manchester workshop or by our UK production partner, depending on the size and material.

By debit or credit card at checkout. Payments are processed securely by Stripe, and we never see or store your full card number. Your order goes into production once payment is taken and your order and artwork are confirmed. For a large or unusual order you can ask for a quote first. The Danger High Voltage Keep Out Sign starts at £5.28 before delivery.

Yes. Order the same product and options again and upload the same file. Keep your print-ready file safe so a repeat order is quick. If anything like a phone number or price has changed, update the artwork before you reorder. The Danger High Voltage Keep Out Sign is printed in our Manchester workshop or by our UK production partner, depending on the size and material.

Yes. Use the Get a quote page and tell us the size, quantity, material, deadline and delivery postcode, and attach any artwork you have. We reply by email or WhatsApp with a price. A quote is also the way to go for delivery to Northern Ireland and the islands. The Danger High Voltage Keep Out Sign comes in 4 listed sizes, from A4 (210 × 297 mm) to A1 (594 × 841 mm).

Walk the route people take and put a sign wherever someone needs the message and would otherwise miss it: each entrance, each approach to the hazard and each change of direction. Larger areas usually need the same sign more than once, in the size that suits each viewing distance. Add them all as one line with a quantity, or as separate lines if you need different sizes or materials. The Danger High Voltage Keep Out Sign starts at £5.28 before delivery.

No. This sign is printed to your order, and the 14-day right to cancel does not apply to goods made to your specification (Consumer Contracts Regulations 2013, regulation 28(1)(b)). You can cancel for a full refund before production starts. If an item is faulty, damaged or not what you ordered, your Consumer Rights Act 2015 rights apply and we reprint or refund. The Danger High Voltage Keep Out Sign is printed in our Manchester workshop or by our UK production partner, depending on the size and material.

No. You can check out as a guest and pay by debit or credit card, processed securely by Stripe. Creating an account at checkout lets you see past orders in My Account. Either way you get an order confirmation email and a tracking email when your order is dispatched. The Danger High Voltage Keep Out Sign starts at £5.28 before delivery.

The Danger High Voltage Keep Out Sign is printed in our Manchester workshop or by our UK production partner, depending on the size and material. Either way, InstantBanners takes the order, checks your file and deals with you from start to finish, and the item is delivered to you by courier. You can reach our Manchester team on 0161 315 1151 or WhatsApp if you have a question before or after you order.

Check it when it arrives. If anything is damaged or missing, tell us within 48 hours with photos of the item and the packaging, through the contact form or on WhatsApp, with your order number. Do not send anything back until we reply; we then arrange a reprint or a refund. This does not affect your legal rights, which the returns page explains. On the opening option, the Danger High Voltage Keep Out Sign is ready to dispatch in 6 working days on Saver or 2 on Express.

Wipe with a soft cloth and warm, soapy water, then rinse and dry. Do not use solvents, scouring pads or strong cleaners, which can dull or lift the print. Store spare boards flat so they do not bow. The Danger High Voltage Keep Out Sign is printed on 3mm Foamex, 3mm Dibond aluminium composite and self-adhesive vinyl.