Printed Bollard Covers

You can choose no or yes. Creasing presses a fold line into thicker paper so it folds cleanly without the print cracking along the fold. Each choice changes the price live in the calculator, so you can compare before you add to basket. Printed Bollard Covers are printed on 3.5mm Correx, 5.5mm Correx and 5mm Correx.

You can choose double Sided or single Sided. Single sided is printed on one face. Double sided prints both faces, for items seen from both directions, such as a flag or a board facing two ways. Each choice changes the price live in the calculator, so you can compare before you add to basket. Printed Bollard Covers are printed on 3.5mm Correx, 5.5mm Correx and 5mm Correx.

Correx itself does not rot or soak up water, so it copes with rain well. How long the print looks good depends mainly on sun and wear. It is designed for temporary signs: weeks and months rather than years. For a permanent outdoor sign, Dibond is the longer-lasting choice. Printed Bollard Covers are printed on 3.5mm Correx, 5.5mm Correx and 5mm Correx.

You can choose no or yes. Drilling puts fixing holes in the corners so you can screw or cable tie the board straight up, instead of drilling it yourself. Each choice changes the price live in the calculator, so you can compare before you add to basket. Printed Bollard Covers are printed on 3.5mm Correx, 5.5mm Correx and 5mm Correx.

Choose drilled corners in the options, then cable tie through the holes to the fence. For a stake, push a stake or cane up inside a flute from the bottom edge and hammer it into the ground. Two ties at the top and two at the bottom stop the board flapping in the wind. Printed Bollard Covers are printed on 3.5mm Correx, 5.5mm Correx and 5mm Correx.

For large items read from a distance, 100 to 150 dpi at the finished size is enough. At 100 dpi a Bollards A (988 × 1482 mm) design needs about 3,890 × 5,835 pixels. Logos and text are best as vector artwork, which stays sharp at any size. Photos taken from websites or social media are usually far too small; our file check flags images that may print soft.

A PDF at the finished size is best, with fonts embedded or converted to outlines. We also take AI, EPS and SVG, and high resolution JPG, PNG or TIFF files. Word, PowerPoint and Canva files are fine as a starting point, but export a full-quality PDF if you can. You can upload up to 3 files of 25 MB each on the product page, or upload later: we email you after you order. Printed Bollard Covers are printed on 3.5mm Correx, 5.5mm Correx and 5mm Correx.

Yes. You can upload your file on the product page, or place the order and upload later: we email you after you order. Your designer can send the file to us by email or WhatsApp with your order number, so it does not have to come through you. The turnaround clock starts once your order and artwork are confirmed, so send the file early if you have a deadline. For Printed Bollard Covers, set your file up at the size you order, for example Bollards B (703 × 1482 mm).

Our file check catches the usual problems: the wrong size, no bleed, low resolution images and text too close to the edge. We tell you what needs fixing before anything is printed, and you can send a new file. If you would rather we sort it, the typesetting option (£15, 1 proof and 2 rounds of changes) sets your text and logo on a clean layout. For Printed Bollard Covers, set your file up at the size you order, for example Bollards B (703 × 1482 mm).

The quantity is part of the options: from 1 up to 90 (1, 2, 3, 4, 5, 6, 7 and 8 and more). The price shown is the total for the quantity you pick, so divide by the quantity to compare the price each before you order. For a bigger run than the options list, ask for a quote with the size, quantity and deadline. Printed Bollard Covers are made to order by our UK production partner.

A Bollards A (988 × 1482 mm) Correx sign starts at £33.72 on the lowest priced options and Saver turnaround. Pick that size in the calculator to see the price with your own material, finishing and turnaround. UK mainland delivery is £7.95, free once your basket reaches £99.

Walk or drive the route and mark every junction where people need a direction, plus one at the start and one at the destination. Allow a few spares for any that get damaged or taken. Quantities run from 1 to 90 in the options, priced as a total, so compare the price each at two or three quantities. Printed Bollard Covers come in 2 listed sizes, from Bollards B (703 × 1482 mm) to Bollards A (988 × 1482 mm).

Only delivery is added. The goods price you see in the calculator is final, with no VAT added. UK mainland delivery is £7.95 per order and free when your goods total is £99 or more after any discount code (artwork and design fees do not count towards it). Any artwork or design fee you choose shows as its own line in the basket, so you can see exactly what you are paying for. Printed Bollard Covers start at £33.72 before delivery.

Yes. Express makes these Correx signs ready to dispatch in 10 working days on the opening option, priced at £39.05 against £33.72 on Saver (10 days). To plan back from a date, add 1 to 3 working days for the courier after dispatch and allow for artwork: production starts once your order and artwork are confirmed. If the date is very tight, call 0161 315 1151 before you order.

Yes, with a difference in price. Mainland Scottish Highlands postcodes, for example around Inverness, Fort William, Oban and Thurso, pay the mainland rate plus £10 once per order, even when the order qualifies for free delivery. Northern Ireland, the Scottish islands, the Isle of Man, the Channel Islands, the Isles of Scilly and the Isle of Wight are quoted before you order: use Get a quote or call 0161 315 1151. We do not deliver outside the UK. Printed Bollard Covers start at £33.72 before delivery.

Printed Bollard Covers have 2 listed sizes from Bollards B (703 × 1482 mm); Lamp Post Wraps has 3 from Raised Lamp Post Wrap. Prices start at £33.72 and £16.99 respectively. Pick the one whose size and material fit where it will go; both pages show live prices for every option.

Printed Bollard Covers have 2 listed sizes from Bollards B (703 × 1482 mm); Lamp Post Toblerone Signs comes in Lamp post toblerones. Prices start at £33.72 and £21.82 respectively. Pick the one whose size and material fit where it will go; both pages show live prices for every option.

Printed Bollard Covers have 2 listed sizes from Bollards B (703 × 1482 mm); Venue Arrow Signs comes in Venue Arrows. Prices start at £33.72 and £3.96 respectively. Pick the one whose size and material fit where it will go; both pages show live prices for every option.

Street Correx signs are for temporary messages seen from the street: events, open days, directions, road closures for events and campaigns. Correx is light, waterproof and cheap, so it suits signs that go up for days or weeks and then come down. Get permission before fixing anything to lamp posts, railings or bollards on public land. Printed Bollard Covers are printed on 3.5mm Correx, 5.5mm Correx and 5mm Correx.

Supply CMYK where you can. RGB files are converted to CMYK for print, which can make very bright greens, blues and oranges look slightly duller. If you need a brand colour matched, give us the Pantone reference and we match it as closely as the material allows. Small differences between a screen and the printed item are normal, because screens give off light and print reflects it. Printed Bollard Covers are printed on 3.5mm Correx, 5.5mm Correx and 5mm Correx.

By debit or credit card at checkout. Payments are processed securely by Stripe, and we never see or store your full card number. Your order goes into production once payment is taken and your order and artwork are confirmed. For a large or unusual order you can ask for a quote first. Printed Bollard Covers come in 2 listed sizes, from Bollards B (703 × 1482 mm) to Bollards A (988 × 1482 mm).

Yes. Call us on 0161 315 1151 or message us on WhatsApp and tell us where the Correx sign will go, how long it needs to last and your deadline. You can also ask a question on this page; our team answers and the question may be published to help other buyers. For a price on something the calculator does not cover, use Get a quote. Printed Bollard Covers are made to order by our UK production partner.

Yes. Add each design to the basket as its own line with its own file or online design, then check out once. Delivery is charged once per order, and becomes free when the goods total reaches £99. If several lines use the same artwork, choose "Same artwork as another item in my basket" so you only pay one design fee. Printed Bollard Covers start at £33.72 before delivery.

No. You can check out as a guest and pay by debit or credit card, processed securely by Stripe. Creating an account at checkout lets you see past orders in My Account. Either way you get an order confirmation email and a tracking email when your order is dispatched. Printed Bollard Covers start at £33.72 before delivery.

Contact us straight away on 0161 315 1151 or WhatsApp with your order number. If production has not started we can take a corrected file, or cancel the order and refund you in full. Once production starts the order cannot be changed. Printing that matches the design you approved or the file you supplied is not a fault, so check spelling, phone numbers and dates carefully before you order. Printed Bollard Covers start at £33.72 before delivery.

Yes. Use the Get a quote page and tell us the size, quantity, material, deadline and delivery postcode, and attach any artwork you have. We reply by email or WhatsApp with a price. A quote is also the way to go for delivery to Northern Ireland and the islands. Printed Bollard Covers start at £33.72 before delivery.

Yes. Order the same product and options again and upload the same file. Keep your print-ready file safe so a repeat order is quick. If anything like a phone number or price has changed, update the artwork before you reorder. Printed Bollard Covers come in 2 listed sizes, from Bollards B (703 × 1482 mm) to Bollards A (988 × 1482 mm).

No. We are not VAT registered, so we do not charge VAT and cannot issue a VAT invoice. You get an order confirmation email with the items, options and total paid, which works as your receipt. Because no VAT is added, the price you see in the calculator is the price you pay for the goods, with delivery shown at checkout. Printed Bollard Covers are made to order by our UK production partner.

Printed Bollard Covers are made to order by our UK production partner. Either way, InstantBanners takes the order, checks your file and deals with you from start to finish, and the item is delivered to you by courier. You can reach our Manchester team on 0161 315 1151 or WhatsApp if you have a question before or after you order.

No. These Correx signs are printed to your order, and the 14-day right to cancel does not apply to goods made to your specification (Consumer Contracts Regulations 2013, regulation 28(1)(b)). You can cancel for a full refund before production starts. If an item is faulty, damaged or not what you ordered, your Consumer Rights Act 2015 rights apply and we reprint or refund. Printed Bollard Covers are made to order by our UK production partner.

Check it when it arrives. If anything is damaged or missing, tell us within 48 hours with photos of the item and the packaging, through the contact form or on WhatsApp, with your order number. Do not send anything back until we reply; we then arrange a reprint or a refund. This does not affect your legal rights, which the returns page explains. On the opening option, Printed Bollard Covers are ready to dispatch in 10 working days on Saver.

Wipe with a soft cloth and warm, soapy water, then rinse and dry. Do not use solvents, scouring pads or strong cleaners, which can dull or lift the print. Store spare boards flat so they do not bow. Printed Bollard Covers are printed on 3.5mm Correx, 5.5mm Correx and 5mm Correx.